PULSAR

25,000

SOLID STATE PDM AM TRANSMITTER

Features:

• A STRONGER SIGNAL WITH 140% POSITIVE PEAK CAPABILITY AT RATED POWER LOWER POWER COST
  
• REDUNDANT MODULAR DESIGN AVOIDS DOWN TIME - INCORPORATES (12) 2.5KW POWER AMPS
  
• OUTPUT TUNING & LOADING CONTROLS FOR PERFECT MATCH TO ANTENNA
  
• VSWR FOLDBACK AND PROTECTION
  
• 3 TIMES FAULT RECYCLING
  
• OUTSTANDING PERFORMANCE FROM 1KW TO 27KW.
  
• 5 POWER LEVEL PRESETS
  
• SOLID STATE PDM DESIGN ACHIEVES BEST AUDIO QUALITY, BEST FREQUENCY RESPONSE AND LOWEST LEVELS OF DISTORTION ENERGY-ONIX QUALITY
  

Energy-Onix Pulsar transmitters are the most ruggedly-constructed, solid state AM transmitters available today. Designed for survivability in the most severe environments, Pulsar transmitters offer the combination of long-term reliability, unsurpassed audio performance and price economy made famous by Energy-Onix.

UNIVERSAL PA DESIGN

The solid state design is field proven in hundreds of applications. All medium and high power Pulsar transmitters use identical broadband power amplifier modules. Amplifiers are fully interchangeable within any Pulsar transmitter. This permits a standardized spare complement to be located at one flagship station. Each 2.5KW drawer contains (4) 630 watt modules.

DESIGNED TO KEEP YOU “ON THE AIR”

The Pulsar series is designed to remain “On The Air” in the unlikely event of a PA module failure. Remaining modules will continue to operate without any change in modulation capability. The transmitter contains (12) independent 2.5KW modules. In the event of a module problem, it will turn off, and the “inoperative” unit can be removed by simply sliding it out and then it can be troubleshot, returned to the factory, or can be replaced by a spare PA Drawer.

PULSAR ....... SOLID STATE PDM AM FOR THE REAL WORLD

We know that broadcasters demand reliability along with impressive features. To keep you “ON THE AIR”, every Pulsar incorporates extensive surge suppression and overload protection. A full range antenna line coupler is standard for less-than-ideal antenna systems. A simple, reliable conventional brute-force power supply is used with the hot-plugable power amp modules. Conservatively rated and cool running, the choice is Pulsar -- field proven by real broadcasters in the real world.

TECHNICAL AND MECHANICAL SPECIFICATIONS

Configuration: Twelve independent power modules with integral cooling fans. Power Output: 25,000 watts (rated) 27,000 watts (capable) Power Control: Automatic via five (local or remote) selectable levels. 1 through 4 are pre-sets, #5 is front panel adjustable. Frequency Range: 530 KHz to 1700 KHz RF Output: 50 ohms, 3 1/8” EIA Maximum VSWR: 1.5:1 Modulator Type: Pulse Duration (PDM) Audio Freq. Resp: ± 0.5 dB, 30-10,000 Hz Audio Dist. (THD): < 2% (95% Mod, 400 Hz) Mod. Capability: 133% positive peak Carrier Shift: <2% Max. (1% Typical) RF Harmonics: -80 dB or more below rated output Spurious Outputs: -80 dB or more below rated output Noise and Hum: -60 dB or better at 100% Mod Freq. Stability: ± 5 Hz

Audio Input: 600 ohms active balanced, -10 dBm to +10 dBm Power Input: 198-460 volts (specify), 3-Phase, 50/60 Hz (specify), Single phase available by special order Power Variation: ± 10% voltage ± 2 Hz frequency Power Factor: 0.9 or better (.92 typical) Overall Efficiency: 76% Power Consumption: 33,000 W (0% modulation) 47,000 W (100% modulation) Metering: Forward/Reflected Power, DC Current, DC and AC Voltage Remote Control: Transmitter ON/OFF, Power Level Selection, Overload Reset Telemetry Metering Samples Ambient Temp.: -10oC to 50oC Humidity Range: 0-95% Altitude: 0-4,000m (0-13,000 ft.) Size: Five cabinets, combined dimensions 72 3/4” H x 113”W x 37 1/4” D Weight: 4,500 lbs.