Energy-Onix 518-758-1690

PULSAR

10,000

SOLID STATE PDM AM TRANSMITTER

Features:

A STRONGER SIGNAL WITH 140% POSITIVE PEAK CAPABILITY AT RATED POWER
LOWER POWER COST
REDUNDANT MODULAR DESIGN AVOIDS DOWNTIME INCORPORATES (6) 2KW POWER AMPS
OUTPUT TUNING & LOADING CONTROLS FOR PERFECT MATCH TO ANTENNA
VSWR FOLDBACK AND PROTECTION
3 TIMES FAULT RECYCLING
OUTSTANDING PERFORMANCE FROM 100 WATTS TO 12KW.
4 POWER LEVEL PRESETS
SOLID STATE PDM - A PROVEN FORM OF DIGITAL MODULATION DESIGN ACHIEVES BEST AUDIO QUALITY, BEST FREQUENCY RESPONSE, LOWEST LEVELS OF DISTORTION AND HIGHEST EFFICENCY.

ENERGY-ONIX QUALITY

Energy-Onix Pulsar transmitters are the most ruggedly-constructed, solid state AM transmitters available today. Designed for survivability in the most severe environments, Pulsar transmitters offer the combination of long-term reliability, unsurpassed audio performance and price economy made famous by Energy-Onix.

UNIVERSAL PA DESIGN

The solid state design is field proven in hundreds of applications. All Pulsar transmitters use identical broadband power amplifier modules. Amplifiers are fully interchangeable within any 10KW Pulsar transmitter. This permits a standardized spare complement to be located at one flagship station. Each 2KW drawer contains (4) 500 watt modules.

DESIGNED TO KEEP YOU “ON THE AIR”

The Pulsar series is designed to remain “On The Air” in the unlikely event of a PA module failure. Remaining modules will continue to operate without any change in modulation capability. The transmitter contains (6) independent 2KW modules. In the event of a module problem, it will turn off, and the “inoperative” unit can be removed by simply sliding it out and then it can be troubleshot, returned to the factory, or can be replaced by a spare PA Drawer.

PULSAR ....... SOLID STATE DIGITAL PDM AM

FOR THE REAL WORLD

We know that broadcasters demand reliability along with impressive features. To keep you “ON THE AIR”, every Pulsar incorporates extensive surge suppression and overload protection. A full range antenna line coupler is standard for less-than-ideal antenna systems. A simple, reliable conventional brute-force power supply is used with the hot-plugable power amp modules. Conservatively rated and cool running, the choice is Pulsar -- field proven by real broadcasters in the real world.

Technical and Mechanical Specifications
Configuration: Six independent power modules with integral cooling fans. Power Output: 10,000 watts (rated) 12,000 watts (capable) Power Control: Automatic via five (local or remote) selectable levels. 1 through 4 are pre-sets, #5 is front panel adjustable. Frequency Range: 530 KHz to 1700 KHz RF Output: 50 ohms, 1 5/8” EIA Maximum VSWR: 1.5:1 Modulator Type: Pulse Duration (PDM - Digital Mod. compatible with DAB system) Audio Freq. Resp: ± 0.5 dB, 30-10,000 Hz Audio Dist. (THD): < 1% (95% Mod, 400 Hz) Mod. Capability: 133% positive peak Carrier Shift: <2% Max. (1% Typical) RF Harmonics: -80 dB or more below rated output Spurious Outputs: -80 dB or more below rated output Noise and Hum: -60 dB or better at 100% Mod Freq. Stability: ± 5 Hz	Audio Input: 600 ohms active balanced, -10 dBm to +10 dBm Power Input: 198-450 volts (specify), 3-Phase, 50/60 Hz (specify), Single phase available by special order. Power Variation: ± 10% voltage ± 2 Hz frequency Power Factor: 0.9 or better (.92 typical) Overall Efficiency: 80% with 400 Hz modulation. Power Consumption: 12,500W (0% modulation) 18,750 W (100% modulation) Metering: Forward/Reflected Power, DC Current, DC and AC Voltage Remote Control: Transmitter ON/OFF, Power Level Selection, Overload Reset Telemetry Metering Samples Ambient Temp. : -10oC to 50oC Humidity Range: 0-95% Altitude: 0-4,000m (0-13,000 ft.) Size: Two cabinets, combined dimensions 72 3/4” H x 56 1/2”W x 37 1/4” D Weight: 1,800 lbs.